| Tank Capacity |
3 L |
| Heating Power |
100 W |
| Ultrasonic Power |
150 W |
| Ultrasonic Frequency |
3 KHz |
| Size |
238×138×100 mm |
| Ultrasonic Timer |
0 to 60 Minute, infinity |
| Set Power |
0 to 120% |
| Power Supply |
100V to 120V/AC, 50/60Hz 200V to 240V/AC, 50/60Hz |
| Lid |
Have |
| Accessory Basket |
Optional |
| Pulse |
yes |
| Sweep |
yes |
| Degas |
yes |
| Drainage |
Optional |
- Temperature control knob (for adjusting the temperature of the cleaning liquid), observed and expected values button
- Start/pause, memory, and an on/off button are all included
- Voltage is set at 40%, 70%, as well as 100% to use the ultrasonic power-setting button
- Degas signal sweep switch
- Degassing is the removal of dissolved oxygen trapped in a liquid
- In ultrasonic cleaning systems, trapped, dissolved oxygen in the ultrasonic cleaning solution will hinder the ability of the system to clean
- By reinforcing peak performance, pulse activatable electricity increases 20%. (High-strength cleaning power of 120 percent with pulse)
- De-gassing is required to remove the dissolved oxygen from the system
- Due to frequency modulation, the sweep function ensures optimal sound field distribution in the cleaning bath
- Lid made from steel, basket, mesh baskets
- The materials used and the reliable technology prolong the service life of the units
- The basis of nearly perfect cleaning processes with ultrasound is the high-performance transducer system with 37 kHz
- The ultrasonic units offer practically every available technical feature. Now the units of the device with degas sweep pulse increase the ultrasonic effect further to obtain even better results
- When used in tough permanent operations, you will find that the new units with their functional design fully meet the demands of any cleaning task
Ultrasonic cleaners can be effectively used to cleaning, disinfecting, degreasing, descaling, stripping, burnishing, deflating, removing rust, removing dust, and so on.
