Lab Equipment Expert info@labzee.com
Enquiry Now
captcha-image

Biochemical Cooling Incubator BZBI-504
Catalog

Biochemical Cooling Incubator BZBI-504

Biochemical Cooling Incubator BZBI-504 has a temperature controller with a PID parameter control function that is operated through an intellectual microprocessor. It has a digital display, 145 lit gentle capacity, and a temperature range of -10 to 50 ˚C. Designed with stainless steel layer of toughened glass door with sealing rubber. The shelves inside the chamber are easy to remove, wash, and can be adjustable.

Capacity 145 liters
Temperature Range - 10 to 50 ℃
Temperature Accuracy ± 0.1 ℃     
Temperature Fluctuation ±1℃     
Material Internal Stainless Steel
Control Mode Microprocessor PID Controller
Convection Forced Convection
Number Of Doors 2 (Built-In Heat Proof Glass Door)
Door Gasket High-Temperature Silicone Rubber
Shelves 2 Adjustable Position Shelves
Refrigeration Air cooling, R134A, controllable refrigeration, and non-frost design
Display LED Display
Voltage 220V 50Hz
Power 1100 W
Internal Dimensions W×D×H 500×450×650 mm
  • The racks within the chamber are easy to remove and clean. Each shelf's length can also be adjusted
  • A microprocessor-based device with a PID parameter control function is known as an intelligent temperature controller
  • Set and actual temperatures are displayed digitally. Accuracy and reliability in temperature regulation
  • On the inner layer of the door, there is a covering of toughened glass with securing rubber for convenient observation of the in-incubator without affecting the incubator temperature
  • The delayed-star and high/low-pressure protection functions were included in the Module-designed refrigeration system

It applies to water analysis and the BOD determination, bacterium, mold, microorganism’s raise, the preservation, breeding experiment special-use equipment in the environmental protection, the hygienic guard, medicine examines, the agriculture vice-, scientific research, colleges, the production department and so on.

Related Products of Biochemical Cooling Incubator


Biochemical Cooling Incubator BZBI-503
Biochemical Cooling Incubator BZBI-503
  • Capacity: 247 liters
  • Temperature Range: 5 to 50 ℃
  • Temperature Accuracy: ± 0.1 ℃     
  • Temperature Fluctuation: ± 0.5 ℃     
  • Material Internal: Stainless Steel
  • Control Mode: Microprocessor PID Controller
  • Convection: Forced Convection
  • Number Of Doors: 2 (Built-In Heat Proof Glass Door)
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2 Adjustable Position Shelves
  • Refrigeration: Air cooling, R134A, controllable refrigeration, and non-frost design
  • Display: LED Display
  • Voltage: 220V 50Hz
  • Power: 800 W
  • Internal Dimensions W×D×H: 600×550×750 mm

Biochemical Cooling Incubator BZBI-502
Biochemical Cooling Incubator BZBI-502
  • Capacity: 145 liters
  • Temperature Range: 5 to 50 ℃
  • Temperature Accuracy: ± 0.1 ℃     
  • Temperature Fluctuation: ± 0.5 ℃     
  • Material Internal: Stainless Steel
  • Control Mode: Microprocessor PID Controller
  • Convection: Forced Convection
  • Number Of Doors: 2 (Built-In Heat Proof Glass Door)
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2 Adjustable Position Shelves
  • Refrigeration: Air cooling, R134A, controllable refrigeration, and non-frost design
  • Display: LED Display
  • Voltage: 220V 50Hz
  • Power: 700 W
  • Internal Dimensions W×D×H: 500×450×650 mm
Biochemical Cooling Incubator BZBI-505
Biochemical Cooling Incubator BZBI-505
  • Capacity: 247 liters
  • Temperature Range: - 10 to 50 ℃
  • Temperature Accuracy: ± 0.1 ℃     
  • Temperature Fluctuation: ±1℃     
  • Material Internal: Stainless Steel
  • Control Mode: Microprocessor PID Controller
  • Convection: Forced Convection
  • Number Of Doors: 2 (Built-In Heat Proof Glass Door)
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2 Adjustable Position Shelves
  • Refrigeration: Air cooling, R134A, controllable refrigeration, and non-frost design
  • Display: LED Display
  • Voltage: 220V 50Hz
  • Power: 1650 W
  • Internal Dimensions W×D×H: 600×550×750 mm
Biochemical Cooling Incubator BZBI-501
Biochemical Cooling Incubator BZBI-501
  • Capacity: 80 liters
  • Temperature Range: 5 to 50 ℃
  • Temperature Accuracy: ± 0.1 ℃     
  • Temperature Fluctuation: ± 0.5 ℃     
  • Material Internal: Stainless Steel
  • Control Mode: Microprocessor PID Controller
  • Convection: Forced Convection
  • Number Of Doors: 2 (Built-In Heat Proof Glass Door)
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2 Adjustable Position Shelves
  • Refrigeration: Air cooling, R134A, controllable refrigeration, and non-frost design
  • Display: LED Display
  • Voltage: 220V 50Hz
  • Power: 600W
  • Internal Dimensions W×D×H: 400×400×500 mm

Air-jacketed Thermostatic Incubator

Air-jacketed Thermostatic Incubator BZAI-505
Air-jacketed Thermostatic Incubator BZAI-505
  • Capacity: 270  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5  to 65 ℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220V  50Hz
  • Power: 600W
  • Internal Dimensions (W×D×H ): 600×600×750 mm
Air-jacketed Thermostatic Incubator BZAI-504
Air-jacketed Thermostatic Incubator BZAI-504
  • Capacity: 162  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5  to 65 ℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220V  50Hz
  • Power: 400W 
  • Internal Dimensions (W×D×H ): 500×500×650 mm
Air-jacketed Thermostatic Incubator BZAI-502
Air-jacketed Thermostatic Incubator BZAI-502
  • Capacity: 50  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5  to 65 ℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220V  50Hz
  • Power: 200W
  • Internal Dimensions (W×D×H ): 350×350×410 mm

Air-jacketed Thermostatic Incubator BZAI-503
Air-jacketed Thermostatic Incubator BZAI-503
  • Capacity: 80  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5  to 65 ℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220V  50Hz
  • Power: 250W 
  • Internal Dimensions (W×D×H ): 400×400×500 mm

Air-jacketed Thermostatic Incubator BZAI-501
Air-jacketed Thermostatic Incubator BZAI-501
  • Capacity: 20  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5  to 65 ℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220V  50Hz
  • Power: 150W
  • Internal Dimensions (W×D×H ): 250×250×320 mm

BOD Refrigerated Incubator

BOD Refrigerated Incubator BZRI-501
BOD Refrigerated Incubator BZRI-501
  • Temperature Range: 0 to 65 ℃
  • Temperature Resolution Ratio: 0.1 ℃
  • Volume: 70L
  • Temperature Motion: High Temp.：±0.5 ℃      Low Temp.：±1 ℃
  • Temperature Uniformity: ±1.5 ℃
  • Inner Chamber: Mirror Stainless Steel
  • Outer Shell: Cold rolling steel electrostatic spraying exterior
  • Compressor: Air-cooled hermetic compressor
  • Cryogen: R134a
  • Defrost Structure: Automatic control intelligent defrosting
  • Test Hole: Inner diameter 43mm(one)
  • Controlled External Power Supply: Outer universal socket (one), inner waterproof socket(one)
  • Power Rating: 0.8 KW
  • Insulation Layer: Polyurethane
  • Heater: Stainless steel heater
  • Temperature Setting Mode: Touch button setting
  • Temperature Display Mode: LCD upper screen; setting temperature: the lower row
  • Timer: 0 to 99.9h    Without E  model：0 to 99.9h×30 segment(with timing wait function)
  • Operation Function: E model Fixed value operation timing function, auto-stop, Without E model Program operation
  • Sensor: PT100
  • Inner Chamber size(W×L×H): 420×350×500 mm
  • Exterior size (W×L×H): 570×560×1030 mm
  • Packing size (W×L×H): 730×720×1190 mm
  • Shelf number: 9
  • Power Supply Current rating: AC220V/2.3A
  • Net Weight: 69 Kg
  • Gross Weight: 92 Kg
  • Shelf: 2
  • Shelf Frame: 4

Water-Jacketed Thermostatic Incubator

Water-Jacketed Thermostatic Incubator BZWI-503
Water-Jacketed Thermostatic Incubator BZWI-503
  • Capacity: 162  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5 to 65℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100 
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220 V  50 Hz
  • Power: 250 W 
  • Internal Dims (W×D×H Mm): 500×500×650
Water-Jacketed Thermostatic Incubator BZWI-502
Water-Jacketed Thermostatic Incubator BZWI-502
  • Capacity: 80  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5 to 65℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100 
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220 V  50 Hz
  • Power: 200 W
  • Internal Dims (W×D×H Mm): 400×400×500
Water-Jacketed Thermostatic Incubator BZWI-504
Water-Jacketed Thermostatic Incubator BZWI-504
  • Capacity: 270  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5 to 65℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100 
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220 V  50 Hz
  • Power: 400 W 
  • Internal Dims (W×D×H Mm): 600×600×750

Water-Jacketed Thermostatic Incubator BZWI-501
Water-Jacketed Thermostatic Incubator BZWI-501
  • Capacity: 50  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5 to 65℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100 
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220 V  50 Hz
  • Power: 150 W
  • Internal Dims (W×D×H Mm): 350×350×410

Tri Gas Incubator

Labzee Tri Gas Incubator features a tri-gas control system that maintains optimal levels of carbon dioxide (CO₂), oxygen (O₂) to simulate physiological conditions. The precise temperature range of 5°C above ambient to 60°C ensures ideal growth conditions for various cell types. Their advanced humidity control system maintains relative humidity levels between 80% and 95%. The interior is constructed from stainless steel for easy cleaning and resistance to contamination. Our incubator comes with a built-in alarm system for any deviations from set parameters, ensuring maximum reliability and safety.

Tri Gas Incubator BZTGI-501
Tri Gas Incubator BZTGI-501
  • Volume: 180 L
  • Temperature Range: Ambient +5℃ to 60℃
  • Temperature Accuracy: ±0.1℃ at 37℃
  • Temperature Resolution: 0.1℃
  • Control Type: Digital PID
  • CO₂ Range: 0% to 20%
  • CO₂ Accuracy: ±0.1% at 5% / 37℃
  • CO₂ Resolution: 0.001
  • CO₂ Sensor: IR CO₂ Sensor
  • Microprocessor Control: Yes
  • Inlet Pressure Range: 0.6 to 0.7 bar
  • O₂ Range: 0.6% to 85%
  • O₂ Sensor: Zirconium Dioxide Sensor
  • Display: LED Display
  • Operating Panel: Individual 2-Channel Touch Button
  • Jacket Type: Dry Wall Type (Six-Side Gradient Heating Design)
  • Chamber Material: Stainless Steel (304)
  • Number of Shelves: 3 or 8
  • Chamber Dimensions (L × W × H): 473 × 528 × 710 mm
  • Dimensions (L × W × H): 560 × 620 × 945 mm
  • Weight: 78 kg

Mold Incubator

Mold Incubator BZMI-503
Mold Incubator BZMI-503
  • Temperature Control Range: 5 to 50℃
  • Temperature Fluctuation: ±1℃
  • Humidity Control Range: 40 to 95%RH
  • Humidity Fluctuation: ±5%RH
  • Power Supply: 220V/50Hz,220V/60Hz, or,110V/60Hz
  • Consumption Power: 1500 W
  • Chamber Dimensions: 500×450×650 mm

Mold Incubator BZMI-502
Mold Incubator BZMI-502
  • Temperature Control Range: 5 to 50℃
  • Temperature Fluctuation: ±0.5℃
  • Humidity Control Range: /
  • Humidity Fluctuation: /
  • Power Supply: 220V/50Hz,220V/60Hz, or,110V/60Hz
  • Consumption Power: 800 W
  • Chamber Dimensions: 600×550×750 mm
Mold Incubator BZMI-501
Mold Incubator BZMI-501
  • Temperature Control Range: 5 to 50℃
  • Temperature Fluctuation: ±0.5℃
  • Humidity Control Range: /
  • Humidity Fluctuation: /
  • Power Supply: 220V/50Hz,220V/60Hz, or,110V/60Hz
  • Consumption Power: 700 W
  • Chamber Dimensions: 500×450×650 mm
Mold Incubator BZMI-504
Mold Incubator BZMI-504
  • Temperature Control Range: 5 to 50℃
  • Temperature Fluctuation: ±1℃
  • Humidity Control Range: 40 to 95%RH
  • Humidity Fluctuation: ±5%RH
  • Power Supply: 220V/50Hz,220V/60Hz, or,110V/60Hz
  • Consumption Power: 1800 W
  • Chamber Dimensions: 600×550×750 mm
logo

Standard Shipping

Secure Shopping Guarantee

100% Customer Satisfaction

Genuine Product Guarantee

Popular Products
Quick Links
Address

Copyright © 2024 All Rights Reserved