Download Catalog
Temperature Humidity Chamber BZHC-605 is an environmentally friendly test chamber with a true-color LED touch edge. It shows average temperatures from -40°C to 150°C, and comparative humidity levels tend to range from 20% to 98 % RH. It is made of stainless steel on the inside and cold-rolled steel on the outside, with a powder-coated finish, and it can hold 800 liters of capacity. For steady-state stability testing, basic temperature cycling, but also expedited testing, visualize both temperature and relative humidity test environment.
| Temperature Range | -40℃ to 150℃ |
|---|---|
| Capacity | 800 L |
| Temperature Fluctuation | ±0.5˚C |
| Temperature Uniformity | ±2.0˚C |
| Temperature Deviation | ±2.0˚C |
| Humidity Range | 20% to 98% RH |
| Humidity Fluctuation | ±2.5%RH |
| Humidity Deviation | ±3.0%RH when humidity >75%RH, ±5.0%RH when humidity ≤75%RH |
| Heat up rate non –Linear | -40℃ to 150℃ 3 ˚C /min |
| Cool down rate | + 20°C to -40°C 1 ˚C /min |
| Noise level | ≤70db |
| Control tolerance | Temperature - ±0.20 ˚C humidity : ±1.0%RH |
| Interface | USB, RS-232 or RS-485 |
| Ambient conditions |
Temperature: +5°C to +35°C Humidity: ≤85%RH Air pressure: 86kPa to 106kPa |
| Power | 11KW |
| Electrical Supply | AC380 (1±10%)V(50±0.5)Hz |
| Internal Dimensions (W×D×H) | 1000×1000×800 mm |
| External Dimensions (W×D×H) | 1250×2000×1800 mm |
There is also a smart balanced temperature adjustable control mode
It is powder-coated and made of stainless steel on the inside cold-rolled steel on the outside
A true-color LED touch screen display is used. and a control method that includes a program and a setpoint operating mode
A silicon seal, expanding foam insulation, and fiberboard sheeting are included
The system includes a nichrome heating resistance wire heating system and a centrifugal blower airflow fan system
Having a refrigeration method that does not deplete the ozone layer
It can be edited with 120 different programs, each with a 100-segment editing capability
To perform cold heat and humidity test, cold resistance test, thermal cycling test, ultra-low-temperature test, high-temperature test, storage condition, and calibration function.
