Lab Equipment Expert info@labzee.com
Enquiry Now
captcha-image

Biochemical Cooling Incubator BZBI-503
Catalog

Biochemical Cooling Incubator BZBI-503

Biochemical Cooling Incubator BZBI-503 has a temperature controller with a PID parameter control function that is operated through an intellectual microprocessor. It has a digital display, 247 lit gentle capacity, and a temperature range of 5 to 50 ˚C. Designed with stainless steel layer of toughened glass door with sealing rubber. The shelves inside the chamber are easy to remove, wash, and can be adjustable.

Capacity 247 liters
Temperature Range 5 to 50 ℃
Temperature Accuracy ± 0.1 ℃     
Temperature Fluctuation ± 0.5 ℃     
Material Internal Stainless Steel
Control Mode Microprocessor PID Controller
Convection Forced Convection
Number Of Doors 2 (Built-In Heat Proof Glass Door)
Door Gasket High-Temperature Silicone Rubber
Shelves 2 Adjustable Position Shelves
Refrigeration Air cooling, R134A, controllable refrigeration, and non-frost design
Display LED Display
Voltage 220V 50Hz
Power 800 W
Internal Dimensions W×D×H 600×550×750 mm
  • The racks within the chamber are easy to remove and clean. Each shelf's length can also be adjusted
  • A microprocessor-based device with a PID parameter control function is known as an intelligent temperature controller
  • Set and actual temperatures are displayed digitally. Accuracy and reliability in temperature regulation
  • On the inner layer of the door, there is a covering of toughened glass with securing rubber for convenient observation of the in-incubator without affecting the incubator temperature
  • The delayed-star and high/low-pressure protection functions were included in the Module-designed refrigeration system

It applies to water analysis and the BOD determination, bacterium, mold, microorganism’s raise, the preservation, breeding experiment special-use equipment in the environmental protection, the hygienic guard, medicine examines, the agriculture vice-, scientific research, colleges, the production department and so on.

Related Products of Biochemical Cooling Incubator


Biochemical Cooling Incubator BZBI-505
Biochemical Cooling Incubator BZBI-505
  • Capacity: 247 liters
  • Temperature Range: - 10 to 50 ℃
  • Temperature Accuracy: ± 0.1 ℃     
  • Temperature Fluctuation: ±1℃     
  • Material Internal: Stainless Steel
  • Control Mode: Microprocessor PID Controller
  • Convection: Forced Convection
  • Number Of Doors: 2 (Built-In Heat Proof Glass Door)
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2 Adjustable Position Shelves
  • Refrigeration: Air cooling, R134A, controllable refrigeration, and non-frost design
  • Display: LED Display
  • Voltage: 220V 50Hz
  • Power: 1650 W
  • Internal Dimensions W×D×H: 600×550×750 mm

Biochemical Cooling Incubator BZBI-502
Biochemical Cooling Incubator BZBI-502
  • Capacity: 145 liters
  • Temperature Range: 5 to 50 ℃
  • Temperature Accuracy: ± 0.1 ℃     
  • Temperature Fluctuation: ± 0.5 ℃     
  • Material Internal: Stainless Steel
  • Control Mode: Microprocessor PID Controller
  • Convection: Forced Convection
  • Number Of Doors: 2 (Built-In Heat Proof Glass Door)
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2 Adjustable Position Shelves
  • Refrigeration: Air cooling, R134A, controllable refrigeration, and non-frost design
  • Display: LED Display
  • Voltage: 220V 50Hz
  • Power: 700 W
  • Internal Dimensions W×D×H: 500×450×650 mm
Biochemical Cooling Incubator BZBI-504
Biochemical Cooling Incubator BZBI-504
  • Capacity: 145 liters
  • Temperature Range: - 10 to 50 ℃
  • Temperature Accuracy: ± 0.1 ℃     
  • Temperature Fluctuation: ±1℃     
  • Material Internal: Stainless Steel
  • Control Mode: Microprocessor PID Controller
  • Convection: Forced Convection
  • Number Of Doors: 2 (Built-In Heat Proof Glass Door)
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2 Adjustable Position Shelves
  • Refrigeration: Air cooling, R134A, controllable refrigeration, and non-frost design
  • Display: LED Display
  • Voltage: 220V 50Hz
  • Power: 1100 W
  • Internal Dimensions W×D×H: 500×450×650 mm
Biochemical Cooling Incubator BZBI-501
Biochemical Cooling Incubator BZBI-501
  • Capacity: 80 liters
  • Temperature Range: 5 to 50 ℃
  • Temperature Accuracy: ± 0.1 ℃     
  • Temperature Fluctuation: ± 0.5 ℃     
  • Material Internal: Stainless Steel
  • Control Mode: Microprocessor PID Controller
  • Convection: Forced Convection
  • Number Of Doors: 2 (Built-In Heat Proof Glass Door)
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2 Adjustable Position Shelves
  • Refrigeration: Air cooling, R134A, controllable refrigeration, and non-frost design
  • Display: LED Display
  • Voltage: 220V 50Hz
  • Power: 600W
  • Internal Dimensions W×D×H: 400×400×500 mm

Air-jacketed Thermostatic Incubator

Air-jacketed Thermostatic Incubator BZAI-504
Air-jacketed Thermostatic Incubator BZAI-504
  • Capacity: 162  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5  to 65 ℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220V  50Hz
  • Power: 400W 
  • Internal Dimensions (W×D×H ): 500×500×650 mm
Air-jacketed Thermostatic Incubator BZAI-503
Air-jacketed Thermostatic Incubator BZAI-503
  • Capacity: 80  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5  to 65 ℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220V  50Hz
  • Power: 250W 
  • Internal Dimensions (W×D×H ): 400×400×500 mm
Air-jacketed Thermostatic Incubator BZAI-502
Air-jacketed Thermostatic Incubator BZAI-502
  • Capacity: 50  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5  to 65 ℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220V  50Hz
  • Power: 200W
  • Internal Dimensions (W×D×H ): 350×350×410 mm

Air-jacketed Thermostatic Incubator BZAI-505
Air-jacketed Thermostatic Incubator BZAI-505
  • Capacity: 270  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5  to 65 ℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220V  50Hz
  • Power: 600W
  • Internal Dimensions (W×D×H ): 600×600×750 mm

Air-jacketed Thermostatic Incubator BZAI-501
Air-jacketed Thermostatic Incubator BZAI-501
  • Capacity: 20  liters
  • Control Mode: Microprocessor  PID Controller
  • Convection: Forced  Convection
  • Display: LED  Display
  • Number Of Doors: 2  (Built-In Heat Proof Glass Door)
  • Temperature Range: Ambient+5  to 65 ℃
  • Temperature Accuracy: ±  0.1 ℃
  • Temperature Fluctuation: ±  0.5 ℃
  • Sensor: PT100
  • Material Internal: Stainless  Steel
  • Material External: Steel  Plate With Powder Coating
  • Door Gasket: High-Temperature Silicone Rubber
  • Shelves: 2  Adjustable Position Shelves
  • Safety: High-temperature safety cutoff with audio/visual alarm, over current glass fuse
  • Voltage: 220V  50Hz
  • Power: 150W
  • Internal Dimensions (W×D×H ): 250×250×320 mm

Mold Incubator

Mold Incubator BZMI-504
Mold Incubator BZMI-504
  • Temperature Control Range: 5 to 50℃
  • Temperature Fluctuation: ±1℃
  • Humidity Control Range: 40 to 95%RH
  • Humidity Fluctuation: ±5%RH
  • Power Supply: 220V/50Hz,220V/60Hz, or,110V/60Hz
  • Consumption Power: 1800 W
  • Chamber Dimensions: 600×550×750 mm

Mold Incubator BZMI-503
Mold Incubator BZMI-503
  • Temperature Control Range: 5 to 50℃
  • Temperature Fluctuation: ±1℃
  • Humidity Control Range: 40 to 95%RH
  • Humidity Fluctuation: ±5%RH
  • Power Supply: 220V/50Hz,220V/60Hz, or,110V/60Hz
  • Consumption Power: 1500 W
  • Chamber Dimensions: 500×450×650 mm

Mold Incubator BZMI-501
Mold Incubator BZMI-501
  • Temperature Control Range: 5 to 50℃
  • Temperature Fluctuation: ±0.5℃
  • Humidity Control Range: /
  • Humidity Fluctuation: /
  • Power Supply: 220V/50Hz,220V/60Hz, or,110V/60Hz
  • Consumption Power: 700 W
  • Chamber Dimensions: 500×450×650 mm
Mold Incubator BZMI-502
Mold Incubator BZMI-502
  • Temperature Control Range: 5 to 50℃
  • Temperature Fluctuation: ±0.5℃
  • Humidity Control Range: /
  • Humidity Fluctuation: /
  • Power Supply: 220V/50Hz,220V/60Hz, or,110V/60Hz
  • Consumption Power: 800 W
  • Chamber Dimensions: 600×550×750 mm

Dry Bath Incubator

Dry Bath Incubator BZBI-610
Dry Bath Incubator BZBI-610
  • Temperature Setting Range: 0℃ to 100℃
  • Temperature Control Range: RT+5℃ to 110℃
  • Timing Range: 1min to 9h59min/∞
  • Temperature Accuracy: ≤±0.3℃ at 37℃
  • Display Accuracy: 0.1℃
  • Temperature Uniformity: ≤±0.3℃ at 37℃
  • Heating Time: ≤12min (from 25℃ to 100℃ )
  • Cooling Time 1: ≤12min (from 100℃ to 25℃ )
  • Cooling Time 2: ≤25min (from RT to RT-25℃ )
  • Heating Lid Temperature Setting Range: Off to +10℃
  • Heating Lid Temperature Accuracy: ≤±0.5℃
  • Heating Lid Heating Time: ≤10min (from 25℃ to 100℃ )
  • Storage at 4℃: Yes
  • Multi Points Running: Yes (Maximum 5 points)
  • Multi-Cycle: Yes (Maximum 99 times)
  • Auto Heating: Yes
  • Auto Running: Yes
  • Auto Resume to Run: Yes
  • Power: 150 W
  • Voltage: AC 100 or AC 220 V/50-60 Hz
  • Fuse: 250 V 3A Ф5×20
  • Dimension(mm): 300×200×210
  • Weight(kg): 4.7

Dry Bath Incubator BZDB-502
Dry Bath Incubator BZDB-502
  • Number Of Blocks: 2
  • Heating Temperature Range: +5°C-150°C
  • Temperature Stability Within The Blocks < 60°C: ±0.5°C
  • Temperature Stability Within The Blocks > 60°C: ±1°C
  • Temperature Uniformity < 60°C: 0.5 K
  • Temperature Uniformity > 60°C: 0.5 K
  • Heating Rate / Heat Up Time With: 4.5 K/min
  • External Sensor:
  • Time Setting Range: 1min - 99h59min
  • Permissible Ambient Temperature: 5 to 40°C
  • Permissible Relative Humidity: 0.8
  • Fixed Safety Circuit: 180°C
  • Set-Up Plate Material: Aluminum alloy
  • Adjustment And Display Resolution: 0.1 K
  • Connection For External Temperature Sensor: DIN 12 878
  • External Sensor Variation; DIN EN 60751 Kl. A: < = ± (0.15 + 0.002×ITI) K
  • Voltage: 200-240/115 V
  • Frequency: 50/60 Hz
  • Heat Output: 250 W
  • Power Input: 250 W
  • Set-Up Plate Dimensions: 96×152 mm
  • Dimensions (W × H ×D): 152×86 × 300 mm
  • Weight: 2.5 kg
Dry Bath Incubator BZBI-607
Dry Bath Incubator BZBI-607
  • Temperature Setting Range: 0℃ to 100℃
  • Temperature Control Range: RT.+5℃ to 110℃
  • Timing Range: 1min to 9h959min/∞
  • Temperature Accuracy: ≤±0.3℃
  • Display Accuracy: 0.1℃
  • Temperature Uniformity: ≤±0.3℃
  • Heating Time: ≤12min (from 25℃ to 100℃)
  • Multi Points Running: Yes (Maximum 5 points)
  • Multi Points Running Circularly: Yes (Maximum 99 times)
  • Auto Heating: Yes
  • Auto Running: Yes
  • Auto Resume to Run: Yes
  • Input Power: DC 12 V
  • Power: 150 W
  • Voltage: AC 220 V/AC 110 V50-60 HZ
  • Fuse: 250V 3A Ф5×20
  • Dimension(mm): 260×195×150
  • Weight(kg): 2.5
Dry Bath Incubator BZDB-501
Dry Bath Incubator BZDB-501
  • Number Of Blocks: 1
  • Heating Temperature Range: +5°C-150°C
  • Temperature Stability Within The Blocks < 60°C: ±0.2°C
  • Temperature Stability Within The Blocks > 60°C: ±0.2°C
  • Temperature Uniformity < 60°C: 0.2 K
  • Temperature Uniformity > 60°C: 0.2 K
  • Heating Rate / Heat Up Time With: 5 K/min
  • External Sensor:
  • Time Setting Range: 1min - 99h59min
  • Permissible Ambient Temperature: 5 to 40°C
  • Permissible Relative Humidity: 0.8
  • Heat Output: 165 W
  • Fixed Safety Circuit: 180°C
  • Set-Up Plate Material: Aluminum alloy
  • Adjustment And Display Resolution: 0.1 K
  • Connection For External Temperature Sensor: DIN 12 878
  • External Sensor Variation; DIN EN 60751 Kl. A: < = ± (0.15 + 0.002×ITI) K
  • Voltage: 200-240/115 V
  • Frequency: 50/60 Hz
  • Power Input: 165 W
  • Set-Up Plate Dimensions: 96×76 mm
  • Dimensions (W × H ×D): 152×86 × 190 mm
  • Weight: 1.5 kg

Dry Bath Incubator BZBI-609
Dry Bath Incubator BZBI-609
  • Temperature Setting Range: 0℃ to 100℃
  • Temperature Control Range: RT.+5℃ to 100℃
  • Timing Range: 1min to 99h59min/∞
  • Temperature Accuracy: ≤±0.3℃ (at 37℃)
  • Display Accuracy: 0.1℃
  • Temperature Uniformity: ≤±0.3℃ (at 37℃)
  • Heating Time: ≤15min (from 25℃ to 100℃)
  • Auto Heating: Yes
  • Auto Running: Yes
  • Auto Resume to Run: Yes
  • Temperature Control Group: 2
  • Block Quantity: 4
  • Power: 240 W
  • Voltage: AC 110 V or AC 220 V/ 50-60 Hz
  • Fuse: 250 V; 3A Ф5×20
  • Dimension(mm): 370×254×217
  • Weight(kg): 5

Dry Bath incubator BZBI-602
Dry Bath incubator BZBI-602
  • Temperature Range: RT.+5℃ to 160 ℃
  • Temperature Accuracy: ±0.5℃ (at 40℃)
  • Temperature Uniformity: ±1℃ (at 120℃)
  • Display Accuracy: ±0.5℃
  • Time Range: 0.1℃
  • Heating Time: 1min to 99h59min
  • Block Quantity: ≤15min from 25℃ to 160℃
  • Maximum Power: 2
  • Voltage: 500 W
  • Dimension: AC 220 V or AC 110, 50/60 Hz
  • Weight: 260×220×100 mm
Dry Bath Incubator BZBI-605
Dry Bath Incubator BZBI-605
  • Temperature Range: RT.+5℃ to 100℃
  • Temperature Accuracy: ≤±0.3℃
  • Time Range: 1min to 99h
  • Temperature Uniformity: ≤±0.3℃
  • Display Accuracy: 0.1℃
  • Heating Time: ≤20min from 40℃ to 100℃
  • Voltage: DC 24 V/1.67 A
  • Dimension: 145×113×110mm
  • Weight: 0.5kg
Dry Bath incubator BZBI-601
Dry Bath incubator BZBI-601
  • Temperature Range: RT.+5℃ to 160℃
  • Temperature Accuracy: ±0.5℃ (at 40℃)
  • Temperature Uniformity: ±1℃ (at 120℃)
  • Display Accuracy: ±0.5℃
  • Time Range: 0.1℃
  • Heating Time: 1min to 99h59min/∞
  • Block Quantity: ≤15min（from 25℃ to 160℃）
  • Maximum Power: 1
  • Voltage: 300 W
  • Dimension: AC 220 V or AC 110, 50/60 Hz
  • Weight: 260×220×100 mm

Dry Bath Incubator BZBI-606
Dry Bath Incubator BZBI-606
  • Temperature Setting Range: 0℃ to 100℃
  • Temperature Control Range: RT.-15℃ to 110℃
  • Timing Range: 1min to 5999sec/∞, 1min to 5999min/∞
  • Temperature Accuracy: ≤±0.3℃
  • Display Accuracy: 0.1℃
  • Temperature Uniformity: ≤±0.3℃
  • Heating Time: ≤20min from 25℃ to 100℃
  • Cooling Time 1: ≤20min from 100℃ to 25℃
  • Cooling Time 2: ≤25min from RT.to RT.-15℃
  • Multi Points Running: Yes (Maximum 5 points)
  • Multi Cycle: Yes (Maximum 99 times)
  • Auto Heating: Yes
  • Auto Running: Yes
  • Auto Resume to Run: Yes
  • Input Power: DC 12 V
  • Maximum Power: 60 W
  • Dimension: 145×113×140mm
  • Weight: 1.0kg

Dry Bath incubator BZBI-604
Dry Bath incubator BZBI-604
  • Temperature Setting Range: 0℃ to 110℃
  • Temperature Control Range: RT.+5℃ to 110℃
  • Timing Range: 1min to 99h59min/∞
  • Temperature Accuracy: ≤±0.3℃ (at 37℃)
  • Display Accuracy: 0.1℃
  • Temperature Uniformity: ≤±0.3℃ (at 37℃)
  • Heating Time: ≤20min from 25℃ to 110℃
  • Auto Heating: Yes
  • Auto Running: Yes
  • Auto Resume to Run: Yes
  • Timing Independently for Each Group: Yes
  • Block Quantity: 4
  • Power: 500 W
  • Voltage: AC 110 V or AC 220 V/ 50-60 Hz
  • Fuse: 250 V; 3A Ф5×20
  • Dimension: 370×254×228 mm
  • Weight: 8.0 kg

Mini Dry Bath Incubator

Mini Dry Bath Incubator BZMD-602
Mini Dry Bath Incubator BZMD-602
  • Temperature Control Range: RT + 5°C to 100°C
  • Temperature Control Accuracy: ±0.5°C
  • Timing Range: 0 to 99h59min
  • Display Accuracy: ±0.1°C
  • Heating Time (40°C To100°C Temperature): ≤15min
  • Dimension: 164 × 116×98 mm
  • Net Weight: 0.9kg

Mini Dry Bath Incubator BZMD-601
Mini Dry Bath Incubator BZMD-601
  • Temperature Control Range: RT + 5°C to 100°C
  • Temperature Control Accuracy: ±0.5°C
  • Timing Range: 0 to 99h59min
  • Display Accuracy: ±0.1°C
  • Heating Time (40°C To100°C Temperature): ≤15min
  • Dimension: 164 × 116×98 mm
  • Net Weight: 0.9kg

BOD Refrigerated Incubator

BOD Refrigerated Incubator BZRI-501
BOD Refrigerated Incubator BZRI-501
  • Temperature Range: 0 to 65 ℃
  • Temperature Resolution Ratio: 0.1 ℃
  • Volume: 70L
  • Temperature Motion: High Temp.：±0.5 ℃      Low Temp.：±1 ℃
  • Temperature Uniformity: ±1.5 ℃
  • Inner Chamber: Mirror Stainless Steel
  • Outer Shell: Cold rolling steel electrostatic spraying exterior
  • Compressor: Air-cooled hermetic compressor
  • Cryogen: R134a
  • Defrost Structure: Automatic control intelligent defrosting
  • Test Hole: Inner diameter 43mm(one)
  • Controlled External Power Supply: Outer universal socket (one), inner waterproof socket(one)
  • Power Rating: 0.8 KW
  • Insulation Layer: Polyurethane
  • Heater: Stainless steel heater
  • Temperature Setting Mode: Touch button setting
  • Temperature Display Mode: LCD upper screen; setting temperature: the lower row
  • Timer: 0 to 99.9h    Without E  model：0 to 99.9h×30 segment(with timing wait function)
  • Operation Function: E model Fixed value operation timing function, auto-stop, Without E model Program operation
  • Sensor: PT100
  • Inner Chamber size(W×L×H): 420×350×500 mm
  • Exterior size (W×L×H): 570×560×1030 mm
  • Packing size (W×L×H): 730×720×1190 mm
  • Shelf number: 9
  • Power Supply Current rating: AC220V/2.3A
  • Net Weight: 69 Kg
  • Gross Weight: 92 Kg
  • Shelf: 2
  • Shelf Frame: 4
logo

Standard Shipping

Secure Shopping Guarantee

100% Customer Satisfaction

Genuine Product Guarantee

Popular Products
Quick Links
Address

Copyright © 2024 All Rights Reserved