Biochemical Cooling Incubator BZBI-501

Biochemical Cooling Incubator BZBI-501

Biochemical Cooling Incubator BZBI-501 has a temperature controller with a PID parameter control function that is operated through an intellectual microprocessor. It has a digital display, 80 lit gentle capacity, and a temperature range of 5 to 50 ˚C. Designed with stainless steel layer of toughened glass door with sealing rubber. The shelves inside the chamber are easy to remove, wash, and can be adjustable.

$2,220.00

Capacity 80 liters
Temperature Range 5 to 50 ℃
Temperature Accuracy ± 0.1 ℃     
Temperature Fluctuation ± 0.5 ℃     
Material Internal Stainless Steel
Control Mode Microprocessor PID Controller
Convection Forced Convection
Number Of Doors 2 (Built-In Heat Proof Glass Door)
Door Gasket High-Temperature Silicone Rubber
Shelves 2 Adjustable Position Shelves
Refrigeration Air cooling, R134A, controllable refrigeration, and non-frost design
Display LED Display
Voltage 220V 50Hz
Power 600W
Internal Dimensions W×D×H 400×400×500 mm
  • The racks within the chamber are easy to remove and clean. Each shelf's length can also be adjusted
  • A microprocessor-based device with a PID parameter control function is known as an intelligent temperature controller
  • Set and actual temperatures are displayed digitally. Accuracy and reliability in temperature regulation
  • On the inner layer of the door, there is a covering of toughened glass with securing rubber for convenient observation of the in-incubator without affecting the incubator temperature
  • The delayed-star and high/low-pressure protection functions were included in the Module-designed refrigeration system

It applies to water analysis and the BOD determination, bacterium, mold, microorganism’s raise, the preservation, breeding experiment special-use equipment in the environmental protection, the hygienic guard, medicine examines, the agriculture vice-, scientific research, colleges, the production department and so on.

captcha

Reviews

5 ★
100%
4 ★
0%
3 ★
0%
2 ★
0%
1 ★
0%

Submit Your Review

Frequently Asked Questions

Water-Jacketed Thermostatic Incubator

Water-Jacketed Thermostatic Incubator BZWI-501

  • Capacity : : 50  liters
  • Control Mode : : Microprocessor  PID Controller
  • Convection : : Forced  Convection

$1,470.00

Water-Jacketed Thermostatic Incubator BZWI-502

  • Capacity : : 80  liters
  • Control Mode : : Microprocessor  PID Controller
  • Convection : : Forced  Convection

$1,640.00

Air-jacketed Thermostatic Incubator

Air-jacketed Thermostatic Incubator BZAI-501
  • Capacity : : 20  liters
  • Control Mode : : Microprocessor  PID Controller
  • Convection : : Forced  Convection

$950.00

Air-jacketed Thermostatic Incubator BZAI-502
  • Capacity : : 50  liters
  • Control Mode : : Microprocessor  PID Controller
  • Convection : : Forced  Convection

$1,070.00

Mold Incubator

Mold Incubator BZMI-501

  • Temperature Control Range : : 5 to 50℃
  • Temperature Fluctuation : : ±0.5℃
  • Humidity Control Range : : /

$2,390.00

Mold Incubator BZMI-502

  • Temperature Control Range : : 5 to 50℃
  • Temperature Fluctuation : : ±0.5℃
  • Humidity Control Range : : /

$2,790.00

Dry Bath Incubator

Dry Bath incubator BZBI-601
  • Temperature Range : : RT.+5℃ to 160℃
  • Temperature Accuracy : : ±0.5℃ (at 40℃)
  • Temperature Uniformity : : ±1℃ (at 120℃)
Dry Bath incubator BZBI-602
  • Temperature Range : : RT.+5℃ to 160 ℃
  • Temperature Accuracy : : ±0.5℃ (at 40℃)
  • Temperature Uniformity : : ±1℃ (at 120℃)

Mini Dry Bath Incubator

Mini Dry Bath Incubator BZMD-601

  • Temperature Control Range : : RT + 5°C to 100°C
  • Temperature Control Accuracy : : ±0.5°C
  • Timing Range : : 0 to 99h59min

Mini Dry Bath Incubator BZMD-602

  • Temperature Control Range : : RT + 5°C to 100°C
  • Temperature Control Accuracy : : ±0.5°C
  • Timing Range : : 0 to 99h59min